点击图片查看原图
EAC60.0塑料材底漆用、层间密着ALD-106M50.0 ± 1.0(Z3-Z4) ~ Z61.0 ~ 2.01 maxTOL98.0超速乾、耐可塑剂移型A-117250.0 ± 1.0Z4 ~ Z74.0 ~ 6.01 maxTOL, XYL, PGM, IPA95.0银粉包覆性、耐醇溶剂性优A-822150.0 ± 1.0Z4 ~ Z7< 4.01 maxPaint Solvent, PGM45.0银粉包覆性、耐沸水性优塑胶喷漆用热塑型压克力树脂产品型号 ACRYDIC固成份(%)黏度(Gardner)酸价(KOH mg/g)色度(Gardner)溶剂玻璃转移温度(℃)特性说明A-16645.0 ± 1.0W ~ Z1－1 maxTOL, BuOH49.0可挠性、作业性56-115545.0 ± 1.0Y ~ Z2< 1.01 maxTOL, IBA, BAC90.0耐可塑剂移型性、耐酒精性A-314645.0 ± 1.0Z1 ~ Z4< 5.01 maxPaint Solvent, PGM, TOL, IBA, EAC80.0银粉包覆性、耐醇性、硬度、耐磨A-418350.0 ± 1.0Z ~ Z45.0 ~ 8.01 maxTOL, BuOH--金属密着性、可挠性A-528050.0 ± 1.0J ~ M－1 maxBAC, EAC120硬度、乾燥性WXU-88050.0 ± 1.0V ~ Z1.0 ~ 3.01 maxTOL, MIBK90.0密着性、硬度A-134750.0 ± 1.0T ~ X1.0 ~ 3.01 maxTOL, MIBK90.0密着性、硬度、WXU-880低甲苯含量ALD-11050.0 ± 1.0Y ~ Z1< 1.01 maxTOL86.0标准型、耐醇性ALD-10650.0 ± 1.0Z1 ~ Z32.0 ~ 4.01 maxTOL112.0硬度、乾燥性A-328850.0 ± 1.0Z1 ~ Z42.0 ~ 4.01 maxTOL, EAC112.0硬度、乾燥性、ALD-106低甲苯含量A-919350.0 ± 1.0Z3 ~ Z52.0 ~ 4.01 maxBAC112.0ALD-106无苯化品A-925150.0 ± 1.0Z3 ~ Z6－1 maxXYL, EAC60.0塑料材底漆用、层间密着ALD-106M50.0 ± 1.0(Z3-Z4) ~ Z61.0 ~ 2.01 maxTOL98.0超速乾、耐可塑剂移型A-117250.0 ± 1.0Z4 ~ Z74.0 ~ 6.01 maxTOL, XYL, PGM, IPA95.0银粉包覆性、耐醇溶剂性优A-822150.0 ± 1.0Z4 ~ Z7< 4.01 maxPaint Solvent, PGM45.0银粉包覆性、耐沸水性优特殊用途金属适性热塑型压克力树脂产品型号 ACRYDIC固成份(%)黏度(Gardner)酸价(KOH mg/g)色度(Gardner)溶剂特性说明A-316945.0 ± 1.0Z1 ~ Z5－1 maxXYLPVDF适性、耐候性、喷涂适性52-20445.0 ± 1.0U ~ X5.0 ~ 7.01 maxTOL, BuOH金属密着性、可挠性A-120950.0 ± 1.0Y ~ Z14.0 ~ 6.01 maxTOL, BuOH, EAC硬度、速乾、耐酒精性 · 特殊用途适性热塑型压克力树脂特殊用途适性热塑型压克力树脂产品型号 ACRYDIC固成份(%)黏度(Gardner)酸价(KOH mg/g)色度(Gardner)溶剂特性说明A-022440.0 ± 1.0T ~ X1.0 ~ 3.01 maxMEK, IPA, BCS, TOL, BuOH热可塑橡胶密着性、柔软材真空蒸镀适性*1A-950044.0 ± 1.0Y ~ Z30 ~ 4.01 maxTOL, iBuOH硬度、耐蚀性、无机材质密着性*1A-9500PD53.0 ± 2.0Z1 ~ Z40 ~ 4.01 maxTOL, iBuOH, XYL耐蚀性、颜料分散性、无机材质密着性A-9585MH*2 80.0 ± 1.0< A－1 maxXYLA-9500系列用SILICONE 硬化剂、标准型A-0143*2 78.0 ± 2.0< A－1 maxXYLA-9500系列用SILICONE 硬化剂、柔韧性A-2351*2 85.0 ± 2.0< A－1 maxXYLA-9500系列用SILICONE 硬化剂、PCGF或镁铝合金密着性A-015745.0 ± 1.0V ~ Y4.0 ~ 8.01 maxTOL, BAC玻璃陶瓷密着、耐水性A-326645.0 ± 1.0V ~ Y4.0 ~ 8.01 maxTOL, BAC玻璃陶瓷密着、耐水性、高无
富利佳醇酸树脂 .聚酯树脂